Chinese
Products Description
The 30V 80A adjustable DC regulated power supply is an indispensable device in the electronics field. Its wide output voltage adjustment range can adapt to the power supply requirements of different electronic devices. Advanced voltage stabilization technology and high-quality components ensure the power supply's high stability and reliability. It is equipped with multiple protection functions, such as undervoltage protection and overcurrent protection, to safeguard the safety of equipment and personnel.
The 30V 80A adjustable DC regulated power supply features a simple and elegant appearance design, making it easy to install and use. It is suitable for multiple fields, including electronic teaching, scientific research experiments, and industrial production.
Parameter Description：
| Input Voltage | 230V±10%; 50Hz (optional 115V±10% 60Hz) |
| Output Voltage | 0~100%V |
| Output Current | 0~100%A |
| Operating temperature | 0°C~40°C; Relative humidity: <80%RH |
| Storage temperature | -10°C~70°C; Relative humidity: <70%RH. Voltage stability: ≤1% + 30mV. In constant voltage state, load stability: ≤1% + 30mV. Ripple noise: ≤50mVrms (effective value) |
| Current stability | ≤1% + 30mA. In constant current state, load stability: ≤1% + 30mA. Ripple noise: ≤50mArms (effective value) |
| Display accuracy | Four - digit LED display, 1% + 5 digits |
| Display resolution | Voltage: 00.01V, Current: 00.01A (above 100V for voltage, 0001) |
| Packaging size | Length about 38cm x Width about 24.5cm x Height about 12.5cm |
| Weight with packaging | 3KG/3.3KG/3.5KG (the higher the power, the heavier the weight) |
| Fuse specification | 5A (220V input)/8A (110V input). The front - end output hole is only suitable for output below 5A, within 30V/5A |
| Note for use | Temporary output can be made at the front. For above 5A, please connect to the high - power output port at the rear. Use the rear terminal for high - power applications |
Note * The above parameters are measured at an ambient temperature of 25±5°C; Relative humidity: <80%RH and after 30 - minute pre - heating. The actual parameters may vary slightly.
