Products Description
This 30V adjustable DC regulated power supply is a reliable power solution for laboratories and industrial sites. Its output voltage can be flexibly adjusted to meet different experimental and production needs. The high-precision voltage stabilization system ensures stable output voltage with minimal fluctuations. It features low ripple characteristics to reduce interference with electronic devices. The modular design facilitates maintenance and upgrades. It is widely used in electronic circuit design, automated testing, new energy research and development, and other fields. With safe and reliable performance, it provides peace of mind for your applications.
Parameter Description:
Input Voltage | 230V±10%; 50Hz (optional 115V±10% 60Hz) |
Output Voltage | 0~100%V |
Output Current | 0~100%A |
Operating temperature | 0°C~40°C; Relative humidity: <80%RH |
Storage temperature | -10°C~70°C; Relative humidity: <70%RH. Voltage stability: ≤1% + 30mV. In constant voltage state, load stability: ≤1% + 30mV. Ripple noise: ≤50mVrms (effective value) |
Current stability | ≤1% + 30mA. In constant current state, load stability: ≤1% + 30mA. Ripple noise: ≤50mArms (effective value) |
Display accuracy | Four - digit LED display, 1% + 5 digits |
Display resolution | Voltage: 00.01V, Current: 00.01A (above 100V for voltage, 0001) |
Packaging size | Length about 38cm x Width about 24.5cm x Height about 12.5cm |
Weight with packaging | 3KG/3.3KG/3.5KG (the higher the power, the heavier the weight) |
Fuse specification | 5A (220V input)/8A (110V input). The front - end output hole is only suitable for output below 5A, within 30V/5A |
Note for use | Temporary output can be made at the front. For above 5A, please connect to the high - power output port at the rear. Use the rear terminal for high - power applications |
Note * The above parameters are measured at an ambient temperature of 25±5°C; Relative humidity: <80%RH and after 30 - minute pre - heating. The actual parameters may vary slightly.