Chinese
Products Description
The 30V adjustable DC regulated power supply is a powerful assistant for electronic experiments and industrial production. Its output voltage can be precisely adjusted within the range of 0 to 30V, meeting the power supply needs of different devices. By adopting advanced voltage stabilization technology, it features stable output and low ripple, effectively protecting the safety of equipment. It is widely used in fields such as electronic research and development, communications, and automatic control. This product is equipped with multiple protection functions such as overcurrent, overvoltage, and overheating protection to ensure safe use. The simple operation interface allows users to quickly get started.
Choosing the 30V adjustable DC regulated power supply provides stable and reliable power support for your electronic devices, helping to carry out work efficiently.
Parameter Description：
| Input Voltage | 230V±10%; 50Hz (optional 115V±10% 60Hz) |
| Output Voltage | 0~100%V |
| Output Current | 0~100%A |
| Operating temperature | 0°C~40°C; Relative humidity: <80%RH |
| Storage temperature | -10°C~70°C; Relative humidity: <70%RH. Voltage stability: ≤1% + 30mV. In constant voltage state, load stability: ≤1% + 30mV. Ripple noise: ≤50mVrms (effective value) |
| Current stability | ≤1% + 30mA. In constant current state, load stability: ≤1% + 30mA. Ripple noise: ≤50mArms (effective value) |
| Display accuracy | Four - digit LED display, 1% + 5 digits |
| Display resolution | Voltage: 00.01V, Current: 00.01A (above 100V for voltage, 0001) |
| Packaging size | Length about 38cm x Width about 24.5cm x Height about 12.5cm |
| Weight with packaging | 3KG/3.3KG/3.5KG (the higher the power, the heavier the weight) |
| Fuse specification | 5A (220V input)/8A (110V input). The front - end output hole is only suitable for output below 5A, within 30V/5A |
| Note for use | Temporary output can be made at the front. For above 5A, please connect to the high - power output port at the rear. Use the rear terminal for high - power applications |
Note * The above parameters are measured at an ambient temperature of 25±5°C; Relative humidity: <80%RH and after 30 - minute pre - heating. The actual parameters may vary slightly.
